Mold control is a far better option than mold treatment as it consists of simple precautions a homeowner can take to eliminate the possibilities of mold creation, spreading and subsequent damage to home and health. Of primary importance is the necessity to avoid
humidifiers, because humidity promotes mold growth and to have good ventilation in moisture-laden areas: bathrooms, basements and other dark, moist places that commonly grow mold. Keeping a light on in closets and using a dehumidifier in basements to remove air
moisture, is a good way of mold control.
Steps to prevent mold growth and mold control
Use air conditioners with de-humidifiers, as these are effective in removing excess air moisture, filtering out pollens from the outside and providing air
circulation throughout the home and dry air from these make it difficult for mold to thrive. (Filters should be changed once a month).
Avoid wallpaper and carpets in bathrooms, as mold can grow under them. Use bleach to kill mold in bathrooms. Surfaces that
have mold on them can be cleaned with bleach in a small quantity. All sources of leaks must be traced and fixed as mold thrives in damp conditions. All houseplant soil should be checked regularly to ensure it is not damp and the same applies to firewood/lumber
kept outside. Keep an air filter or ion and ozone generator in the basement or moisture-driven attic to destroy mold and keep the air clean. Clean the bottom of the fridge to ensure mold does not grow under it and for controlling mold, if it already exists in
certain parts of the home, place an air purifier in your home that emits negative ions and ozone.
Equipment that helps in Mold control
The new generation generators, air filters and air conditioners have negative ions and ozone, which are
both capable of reducing the effects of mold. Negative ions are able to remove the spores from the air, to reduce the allergic reactions that people may suffer as a result of mold. It is the mold spores released by the mold, when inhaled that cause these allergic
reactions. Negative ions are much more effective than air filters (even HEPA air filters) at removing allergens, such as mold spores and research indicates that ozone has also been found to be lethal for mold as ozone inactivates mold, rendering the mold cells harmless.
Get rid of mold
Mold in the house can be a headache for any homeowner and the best kept of houses can get affected by this smelly, hygiene problem caused by fungi aided by excessive moisture. All homes need to be kept clean and free from mold and mildew to extend...
Mold in basement
Mold can build up in basements and other wet areas causing cause health problems that can be felt immediately or have a long-term effect after excessive water damage. Thus, it becomes important to dry and clean the area as quickly as possible as...
Mold Solutions
Mold in a building can be very hazardous to health. Detecting the mold and disinfecting the place will be top priority at the time but then again, steps must be taken to prevent the occurrence of the mold infection. Mold grows in moist or damp...
Mold cleaning
Before you start cleaning the mold from the room, it is advisable to ensure the room is well ventilated. It is also of great importance that you wear a mask, gloves and cover your eyes during the cleaning process. If the mold covers a small surface...
Mold Inspections
The presence of mold in a home can be very dangerous. It leads to respiratory problems and other health issues of the inhabitants, in addition to compromising the integrity of the home's walls and foundation. Testing is not costly, and may help...
|
|
