If a homeowner takes up the task of cleaning any mold, the foremost thing to keep in mind is that basic personal protection equipment such as rubber gloves, eye protection and high-quality pollen or dusk mask be worn.
Locating mold to be cleaned
Mold can develop in places that
have excess moisture and lumber seems to be an ideal resting place for collection of fungal spores on the surface of the wood. This kind of mold requires wet wiping and scrubbing to remove it, but simply wiping the wood can release spores into the surrounding air. So, the safer and preventive
approach is to gently spray or wet down the mold prior to the removal.
Products for cleaning mold
Help is at hand for all suffering from mold and it's damaging effects on personal hygiene, health and home equipment as there are numerous products available, ranging from common
bleach to commercial mildewcides (pesticides for mildew, specifically), which are promoted for cleaning mold from wood. The U.S. EPA (Environmental Protection Agency) suggests using a mild detergent and water for most molds clean up. It recommends wet vacuuming the area, wiping or scrubbing the mold
with detergent and water and, after drying, vacuuming with a high-efficiency particulate air (HEPA) vacuum. Another do it yourself alternative could be using common bleach and water for cleaning mold. The U.S. Centers for Disease Control (CDC) recommends using a solution of 10 parts water to one part
bleach to clean mold from surfaces. Stronger formulations of bleach and water may be used, particularly to remove the discoloration caused by the mold fungi. The Wood Handbook, published by the U.S. Forest Products Laboratory, recommends a solution of one part household detergent, 10 parts bleach and
20 parts warm water. The solution should be applied using a bristle brush or sponge to scrub the surface of the wood. One precaution to always take for cleaning mold and especially, when using bleach indoors, is to ensure there is adequate ventilation and wear personal protection equipment. Never mix
bleach with ammonia or any detergent or cleansers that contain ammonia. When using commercial products for cleaning mold, be sure to follow the manufacturer's instructions for use.
Minimizing mold cleaning work
Determining whether mold is active (colorful, damp and slimy with a
musty odor) or Inactive/dormant (dry and powdery) will help you decide cleaning measures.
Active mold can be colorful, and it is damp and slimy with a musty odor. Isolating materials affected by mold minimizes the spread of mold and protects those who may be having allergic or respiratory problems.
Mold prevention
The most important areas while inspecting for mold and moisture intrusion problems are the basement, bathroom and roof of any house. It is easier to undertake mold prevention measures than to get involved in the hassles surrounding its removal and...
Mold abatement
When mold growth runs out of water for reproducing, it goes dormant just waiting for future water availability. Hurricanes often create massive mold infestation problems as does humidity, water leakage and excessive moisture, which alone is...
Allergy Mold
Mold is a live organism that is found in both the indoors and outdoors. Certain types of mold, like the black mold, can be found poison to human systems. It will break done dead material and grow by digesting animal or plant material. It spreads...
Black mold
Black mold is associated with toxicity and the media has often referred to it as Toxic mold or Toxic black mold. This kind of mold is related to Stachybotrys chartarum, a type of greenish-black mold commonly linked with heavy water damage. However,...
Mold Solutions
Mold in a building can be very hazardous to health. Detecting the mold and disinfecting the place will be top priority at the time but then again, steps must be taken to prevent the occurrence of the mold infection. Mold grows in moist or damp...
|
|
